|
The Xenon Trap Monitor is the perfect
complement to the Pulmonex II Xenon
System to ensure a safe environment. The unit continuously monitors trap
effluent during a xenon study via an exhaust hose connection from the
Pulmonex exhaust port to the monitor's intake port.
The Xenon Trap Monitor is simple to operate;
all controls are located on the front panel. Counting results are displayed
every minute with both audible and visual signals to indicate when xenon
levels are above or below the user set threshold. The unit can also check
background levels and perform a self-test for proper operation using a check
source.
The Xenon Trap Monitor includes all the
hardware necessary to mount the unit directly to the Pulmonex II Xenon
System.
 | Dimensions: 6" w x 7" l x 4" h (15.2 x
17.8 x 10.2 cm) |
| Lead Shielding: .5" thick (1.3 cm)
|
| Detector: Halogen Quenched GM Tube, 1.1 cm
dia, 2 mg/cm2 mica window
Voltage: 500 volts regulated |
| Buttons: Background, Test, Count, Reset,
Display Test, Data Entry Mode, Threshold and Up and Down for Threshold
|
| Display: 4 Digit LED |
| Readings: pCi/ml |
| Speaker: Internal, beeps when displays
result |
| Background Count Time: 20 minutes
|
| Power: 12 volts, UL approved, external;
115 VAC Power Adapter |
| Weight: 4.5 lb (2.1 kg) |
 |
|
136-752 |
Xenon Trap
Monitor
Mounts to Pulmonex II Xenon Systems |
|
Related:
|
|
|
101-103 |
Check
Source, Cs-137, 10 µCi
(uncalibrated), 1" dia x .25" thick (2.5 x .64 cm) |
|
|
|
|
